Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Deploying aironet 1141 and 1130 AP

I have 1130 on each floor and planning to add 1141 AP for coverage / redendency. Does it matter if I mix and match on the models? I am using Radius.

Should I "deploy" the identical model on the same floor?

4 REPLIES
VIP Purple

Re: Deploying aironet 1141 and 1130 AP

Should I "deploy" the identical model on the same floor?

No, You can deploy different model AP on same floor.

HTH

Rasika

New Member

Re: Deploying aironet 1141 and 1130 AP

Thanks. They are connected to Cat 2950 / ASA 5500.

Hall of Fame Super Gold

Deploying aironet 1141 and 1130 AP

Should I "deploy" the identical model on the same floor?

I agree with Rasika.  No issue with mixing them.

By the way, what is your LAN backbone and uplink from the AP?

Hall of Fame Super Silver

Re: Deploying aironet 1141 and 1130 AP

Just to add...

One thing that is an issue with mixing those models is the 1141 is 802.11n supported and the 1131 isn't. 802.11n clients tend to stick to available 802.12n access points than to roam to a non 802.11n access point. I've seen this in many environments and the only way to mix the two is to make sure you disable
802.11n.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
168
Views
9
Helpful
4
Replies