Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

DHCP for Clients

We have an Aironet 1200 with the 802.11g card installed. Our clients cannot obtain a DHCP address from the LAN side of the WAP. We can ping the DHCP server, which is a Cisco 2400 series router. Am I missing a setting somewhere? We have no VLAN or filters in place, just a very basic configuration.

Thanks,

Rick Virene

Jacobs Engineering

2 REPLIES
Silver

Re: DHCP for Clients

Verify that your AP is configured for DHCP (express setup) and if configured, check if the paramaters given in the express setup configuration are correct.

New Member

Re: DHCP for Clients

Sbilgi,

Thanks for the reply. We are using a static address for the APs address. It's the clients that were not receiving DHCP assigned addresses. Curiously, I went to demonstate this issue and the problem disappeared on it's own. I'm puzzled as to why this happened, but will call it closed as DHCP functions after reboots the AP.

141
Views
0
Helpful
2
Replies
CreatePlease to create content