Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dhcp for User in flex mode.

hi all, we are installing aps on wlc with flex-connect mode. have some doubts about the dhcp for wireless users. can the WLC in flex model work as dhcp? or whenever the dhcp for wireless users must be out of wlc? thanks to all
Everyone's tags (1)
3 REPLIES

No, you'll want to configure

No, you'll want to configure an ip-helper address at L3 and point to your normal DHCP server for the FlexConnect Users

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Tranks Steve,then users can

Tranks Steve,

then users can use flex-connect the WLC as DHCP? ... is advisable to do that?..

 

Tranks

 

Bronze

Figure 15-1 FlexConnect

Figure 15-1 FlexConnect Deployment

 

That's a typical FlexConnect Deployment. The DHCP Server is advised to be at the Remote Site in a Typical Deployment.
Please refer the following link for more details.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_flexconnect.html
Hope that helps.
70
Views
5
Helpful
3
Replies
CreatePlease to create content