Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP how to assign one of the scopes to the WLAN

Hi,

I have configured 3 DHCP scopes and one WLAN. As I don't see any clear option, can you explain how to bind a particular scope to a WLAN?

Thanks

2 REPLIES
Hall of Fame Super Silver

Re: DHCP how to assign one of the scopes to the WLAN

You need to make sure your wlan ssid is mapped to one of the subnets in which you created a DHCP scope.

-Scott
*** Please rate helpful posts ***
New Member

Re: DHCP how to assign one of the scopes to the WLAN

On the Dynamic interface that you assign to the WLAN you need to make sure you have the DHCP Server IP address as the MGMT interface of the controller. Clients that associate to that SSID will then get an IP address that is in the same network as that dynamic interface.

HTH

149
Views
0
Helpful
2
Replies