Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

DHCP on a WAP

All,

I just got a Cisco Aironet 1242AG. I have it configured but it will be installed in a conference room. So there is a need to have addresses dynamically assigned. Can I configure a DHCP pool on this AP. I found some documentation but it isn't really giving me what I want. Can someone point me in the right direction. Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: DHCP on a WAP

Hi Mario,

Maybe this can get you started;

Configuring the Access Point to Provide DHCP Service

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184a86.html#1057097

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: DHCP on a WAP

Hi Mario,

Maybe this can get you started;

Configuring the Access Point to Provide DHCP Service

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184a86.html#1057097

Hope this helps!

Rob

New Member

Re: DHCP on a WAP

This works fine but one thing, I named my address pool Atlantis and when I look in the logs it is telling me;

Mar 7 11:33:05.734: DHCPD: pool atlantis has no parent.

Mar 7 11:33:05.734: DHCPD: child pool: 165.115.31.0 / 255.255.255.0 (atlantis)

Do you perhaps know what this means?

New Member

Re: DHCP on a WAP

Rob,

Nevermind I figured out what the problem was thanks for the help.

334
Views
0
Helpful
3
Replies
CreatePlease to create content