Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP on Aironet 1242AG

I configured dhcp server on the Aironet 1242AG. There are two SSID's on the Aironet how can I bind this dhcp server to one of the SSID's so all the clients authenticating to this SSID will get their IP from the DHCP server that I configured on the Aironet?

4 REPLIES

Re: DHCP on Aironet 1242AG

so long as the DHCP scope matches the network you want the client to get DHCP from,it should work. When the client attempts to get DHCP it will do a subnet broadcast looking for the DHCP server, and the AP should respond.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: DHCP on Aironet 1242AG

That is true but there are two SSID's and I want one SSID to be able to use one DHCP server and second SSID to use the DHCP server that is on the AP.

Bronze

Re: DHCP on Aironet 1242AG

Did you ever find a solution?

I'm looking for the same setup but have not found it.

Cisco Employee

Re: DHCP on Aironet 1242AG

it will be great if you could start a new discussion for this issue..

Regards

Surendra

1022
Views
0
Helpful
4
Replies