Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

DHCP scope setup for 3702 APs on Microsoft server

Hello all, thanks for taking a look - I need some help. 

 

5508s running 7.6

3502s widely deployed, but wanting to start planning for 3702s. 

Here's my dilemna. Option 43 as-is, simply doesn't work, and I'm having trouble figuring out how to add in the right VCI, or custom DHCP options on our Microsoft DHCP servers... 

 

Can anyone provide me with some screen grabs or PDF instructions to help walk me through this configuration?

 

Thanks much, 

Jason W.

(Here's a link to the doc that led me to believe I need to go down this road, and that there's just s custom DHCP option missing for my 3702 deployment. This link is outdated though.)

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43.html

 

1 ACCEPTED SOLUTION

Accepted Solutions

Hi Jason,There is a very good

Hi Jason,

There is a very good explanation from Jeff.(52.50 explains option43/60 on Windows DHCP)

https://www.youtube.com/watch?v=pKEiPCLO3Qk&list=PL_mADa_gji1MYUz-C-VGkLLMl56L4x5Mh&index=4

I believe VIC should be Cisco AP c3700.

Hope this helps.

Regards,

Christos.

6 REPLIES
New Member

Oh, I believe we're switching

Oh, I believe we're switching to 3702s because the 3502s are set to retire some time coming, right?

Hi Jason,There is a very good

Hi Jason,

There is a very good explanation from Jeff.(52.50 explains option43/60 on Windows DHCP)

https://www.youtube.com/watch?v=pKEiPCLO3Qk&list=PL_mADa_gji1MYUz-C-VGkLLMl56L4x5Mh&index=4

I believe VIC should be Cisco AP c3700.

Hope this helps.

Regards,

Christos.

New Member

Does anyone know of any

Does anyone know of any issues of deploying 3702s mised in with 3502s? We have put in 3 random 3702s in the middle of a 3502 deployment.

 

Even though the 3702s register with the 5508 controllers, AND show clients on them (blue LED), the clients seem to "skip over" the 3702s in favor for the 3502s...

 

Ideas?

 

New Member

I found that video myself as

I found that video myself as you posted it! :-) Since there's no good online documentation from Cisco, I'm going to write a "how to" and publish it on my WordPress... Thx!

Please refer to the link-http

Please refer to the link-

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0MR1/configuration/guide/wlc_cg70MR1/cg_wlan.html

New Member

Thank you everyone.I FINALLY

Thank you everyone.

I FINALLY have a grip on how the DHCP client requests, with a VIC, the DHCP server filters based on the VIC, and then responds with a controller address according to the administrator's programmed return for that VIC.

 

Thanks again!

3161
Views
0
Helpful
6
Replies
CreatePlease to create content