I have instead server Windows 2000 with the service DHCP and i have instead the server ACS 3.2. I have a access point with a static address and a client configured with DHCP who communicate with this access point. When the security disabled, the server DHCP allocate a address to the access point but when the authentication LEAP is enable the DHCP failed.
Try disabling LEAP and WEP, then reset the access point back to the factory settings. See if the client gets a DHCP address. If it does, then configure the AP the way you want and set the key interval to zero and put LEAP back on.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...