I have a Cisco 877W w/ IOS 12.4-15.T7 that does not provide dhcp addresses to wireless clients. The Wired ethernet clients can receive addresses but not the wireless. I have the exact same router, config and O.S. with 4 other client's routers but have not seen this issue. Is there anything I can debug or is there anything wrong with the attached config?
Actually it turns out the config was fine. The issue was the Passphrase itself. I was generating passwords 63 characters in length with symbols included. Question marks in the passphrase are misconstrued by the command line as an actual question, not part of the passphrase. Thus, the client's passphrase never matched because any password with a question mark was always truncated at the question mark.
Problem solved......no more question marks in the passphrase!
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...