Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Difference between 12xx and 11xx series?

Hi!

Is there any difference between 1230AG and 1130AG, for example? Besides metal enclosure and dual antenna connectors?

Thanks!

1 REPLY
Hall of Fame Super Red

Re: Difference between 12xx and 11xx series?

Hi Vladislav,

There are other differences between the 1230AG and the 1130AG as shown below. Note the PoE support,memory and Antenna support in particular (the 1130 has built-in antennas). The other important fact is that the 1230 is first generation and is likely to be EoL before the 1130;

Cisco Aironet 1230AG Series Access Point - First-generation dual-band lightweight or autonomous access point with dual-diversity antenna connectors for challenging RF environments

Two high-performance IEEE 802.11a and 802.11g radios offering 108 Mbps of capacity

2.4 and 5 GHz dual-diversity RP-TNC connectors for external antenna support

Available in either a lightweight version or an autonomous version that may be field-upgraded to lightweight operation

Rugged metal case

16 MB of memory with 8 MB of storage

Operating temperature: -4 to 131?F (-20 to 55?C)

Inline power support (Cisco pre-standard)

Console port for management

Support for the Cisco Self-Defending Network, NAC, WPA, and 802.11i/WPA2

Complete with integrated and secure mounting system

UL2043-rated for placement in plenum areas

Cisco Aironet 1130AG Series Access Point - Dual-band lightweight or autonomous access point with integrated antennas for easy deployment in offices and similar RF environments

Two high-performance IEEE 802.11a and 802.11g radios offering 108 Mbps of capacity

2.4 and 5 GHz integrated diversity omnidirectional antennas for easy deployment without the need for external antennas

Available in either a lightweight version or an autonomous version that may be field-upgraded to lightweight operation

Low-profile plastic case

32 MB of memory with 16 MB of storage

Operating temperature range of 32 to 104?F (0 to 40?C)

Inline power support (Cisco pre-standard and 802.3af)

Console port for management

Support for the Cisco Self-Defending Network, NAC, WPA, and 802.11i/WPA2

Integrated and secure mounting system

UL2043-rated for placement in plenum areas

From this excellent doc;

Cisco Aironet Wireless Access Points Solution Overview

http://www.cisco.com/en/US/products/ps6087/prod_brochure0900aecd8035a015.html

Hope this helps!

Rob

158
Views
0
Helpful
1
Replies
CreatePlease to create content