Different Signals of Different SSIDs in a Single AP
I would like to inquire with regard to wireless signal of different SSIDs in a single AP. I have noticed, using our Fluke AirCheck device as well as our company laptop that SSIDs (Corp and Guest) being broadcasted by the AP being tested omits different signals.
Based on my understanding, if the AP broadcasts any SSID, it should be (in case a little discrepancy) almost the same. On our case, it is different. Guest SSID was observed to have a strong signal while Corp SSID has a weak signal and sometimes none. We are checking it on the same particular AP although we have a large scale AP deployment in our office.
Is this normal? Or do I need to change something?
FYI, we have a 5508 Controller running on version 184.108.40.206 with 1602 APs.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...