03-06-2014 04:34 AM - edited 07-05-2021 12:21 AM
Hi All,
Can someone tell me how I can disable the 2.4 Ghz radio on a single lightweight AP?
Thanks in advance!
Sent from Cisco Technical Support iPad App
Solved! Go to Solution.
04-10-2014 01:11 AM
Hi Scott, we have a /16 as you see by the subnet mask -> 255.255.0.0
They are all at the same.
04-07-2014 03:25 PM
04-24-2017 04:48 PM
Quick question. Does performing this actually stop the radio from transmitting? I am trying to clear some of the 2.4ghz congestion for a specific non-wifi application that is having trouble due to channel interference.
I have disabled a lot of radios, but when I go to a radio that I left active I can see all of the disabled radios in the monitor...
It appears to not be broadcasting the SSID's but it is still active as a transmitter. Will this still cause as much interference as before...
Thanks
Alex.
04-24-2017 05:04 PM
That is what I have done was disable the radio on the AP. This does stop transmitting for that radio.
-Scott
*** Please rate helpful posts ***
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: