Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Disable led on 1131AG while associated with an WLC

Hi,

On autonomous AP's one can disable the bright status LED using the "led ....." command. But how can I disable the LED on a LAP-1131AG? The AP hangs in a bedroom so the light is quite annoying.

Thanks!

Everyone's tags (3)
3 REPLIES
New Member

Re: Disable led on 1131AG while associated with an WLC

OOPS.... found it already..

config ap led-state disable all

New Member

Disable led on 1131AG while associated with an WLC

Anyone know if this can be done through the web GUI, or just on the command-line?

Hall of Fame Super Gold

Disable led on 1131AG while associated with an WLC

Anyone know if this can be done through the web GUI

Depends on the firmware of the WLC.

7.0.X doesn't support this on GUI but 7.4.100.X does.

In 7.0.X, you can enable/disable LED globally but 7.4.100.X have an option to do so individually.

NOTE:  Not sure which firmware starts the support but all my WiSM-2 are running 7.4.100.X.

2253
Views
0
Helpful
3
Replies
CreatePlease to create content