Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Disable LED on LAP1142N

Hi Guys,

i've got a Problem.

im Working in an Hospital. A few weeks ago we installed an Wireles Infrastructure ( WLC5508 & LAP1142N ). Everything works fine.

Now to the Problem: We installed Accesspoints ( LAP1142N ) in some ratient rooms.

The AP's have an LED on the front. This LED disrupt our Patients so they can't sleep.

Now my Question: is it possible to turn off the LED on an LAP1142N.

All i found on the LAP1142N-E-K9 is the option to flash the LED for a time .

led flash {1-3600 / disable}

On an AP1130AG in our Office i can turn off the LED with this command .

led display off

Does anyone have an Idea how to turn off this LED?

Thank you very much.

Björn

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver

Disable LED on LAP1142N

Since it is a LAP, you can do the config ap led-state disable from the wlc cli.

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Disable LED on LAP1142N

If you want to disable only certain AP's, you will need to console into the ap or telent/ssh and run a debug capwap console cli and hit enter.  Then you can do a config t hit enter and enter led display off and hit enter.

-Scott
*** Please rate helpful posts ***
4 REPLIES
Hall of Fame Super Silver

Disable LED on LAP1142N

Since it is a LAP, you can do the config ap led-state disable from the wlc cli.

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Disable LED on LAP1142N

If you want to disable only certain AP's, you will need to console into the ap or telent/ssh and run a debug capwap console cli and hit enter.  Then you can do a config t hit enter and enter led display off and hit enter.

-Scott
*** Please rate helpful posts ***
New Member

Disable LED on LAP1142N

Hi Scott,

Thank you very much. I disabled it on the wlc.

I hope our Patien can sleep tonight.

Björn

Hall of Fame Super Silver

Re: Disable LED on LAP1142N

Just make sure you enable it on all your wlc's:)

-Scott
*** Please rate helpful posts ***
3225
Views
0
Helpful
4
Replies
CreatePlease login to create content