Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

disable multicast on WLC 2500

Hello I would like if you can help me, I enable multicast and I changed the AP Multicast Mode to Multicast an type a multicast ip,

 but now I wanto to change de AP Multicast Mode to unicast, the WLC has the version software 7.6, I read in the configuration guide

 that the command config network multicast mode unicast  configure the controller to use the unicast  but when I try to change this mode

in the CLI  I can only see the command config network multicast mode multicast if I type the comando I get an error.

So what can I do to disable the multicast in this controller.

 

Thanks...

1 REPLY
New Member

 Hi,According to the guide

 

Hi,

According to the guide the command is correct

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_01011.html

Have you tried from the GUI (controller tab -> general)

 

Cheers,

Nour

119
Views
0
Helpful
1
Replies
CreatePlease login to create content