07-16-2013 12:18 PM - edited 07-04-2021 12:26 AM
Looking for some guidance on how to appropriately disable low data rates in our 2.4GHz environment. We would like to disable all b data rates and support only 12 Mbps and above. As I understand it I would configure my WLC data rates as so:
1 Mbps through 11 Mbps - disabled
12 Mbps - Mandatory
18 Mbps through 54 Mbps - supported
Is this the correct way to support g clients and effectively exclude b clients and all associated b overhead? I look forward to any feedback!
thanks
Anthony
Solved! Go to Solution.
07-16-2013 12:55 PM
Yes, that'll do it alright.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
07-16-2013 12:55 PM
Yes, that'll do it alright.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
07-19-2013 03:01 PM
Hello Anthony,
As per your query , yes this is the correct way to do that.
Hope this will help you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide