I've setup a WLC 2206 with 3 LAPs. They register fine and all seem to work. The APs are directly connected to the internal switch of the WLC (P6, P7 and P8). I do not use VLANs. P1 is the connection to the rest of the network.
I can manage the WLC. The WLC sees the LAPs, and they register.
When a client connects, it works as expected. I see the association in the WLC.
HOWEVER: when the client tries to surf the web, the 'site cannot be found or DNS error' occurs. I use WebVPN, so I would expect a redirect to the login page. The DNS resolving however, does not work, and this error occurs.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...