802.11n is rated between 300 Mbps to 450 Mbps. Let's say because it's full duplex, true speed is half, so it's 150 and 225 Mbps. How do you plan to shove 150 Mbps traffic down to a 100 Mbps FastEthernet link? You can't. This is why it's recommended you connect an 802.11-capable AP to GigabitEthernet link.
Like Leo said you really need to uplink your AP to a GigabitEthernet port because you could have a bottleneck on the switch port and you have to use Cat 6 patch cord to ensure the correct speed.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...