Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Does option 43 matter ? WLC5508 ver 7.2 using internal DHCP server

I am using a WLC 5508 and its internal DHCP server. I cant find anywhere I can setup option 43. However, the access points are connected in just fine. Do I need to worry about setting up a seperate DHCP server to get option 43 setup properly ?

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions

Does option 43 matter ? WLC5508 ver 7.2 using internal DHCP serv

If you want to have AP on a different subnet from the WLC, then yes you would want to configure another server and option 43.

If you're fine wtih your current setup, then no.

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
7 REPLIES
Hall of Fame Super Silver

Re: Does option 43 matter ? WLC5508 ver 7.2 using internal DHCP

Option 43 is to help the APs join the wlc. Your APs already are joined and this isnt used by clients.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

Does option 43 matter ? WLC5508 ver 7.2 using internal DHCP serv

Sorry I didnt make my question clear.

I am using a WLC 5508 and its internal DHCP server. I cant find anywhere I can setup option 43.

When I connect a CAPWAPP Access Point to the network, it receives IP address from the WLC 5508 DHCP service just fine. It shows up in the access points list and users can connect to it no problem.

Do I need to worry about setting up a seperate DHCP server to get option 43 setup properly ?

Does option 43 matter ? WLC5508 ver 7.2 using internal DHCP serv

If you want to have AP on a different subnet from the WLC, then yes you would want to configure another server and option 43.

If you're fine wtih your current setup, then no.

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Does option 43 matter ? WLC5508 ver 7.2 using internal DHCP serv

Stephen,

I want to rate your answer is a correct answer.

Do you any chance have a doc from Cisco saying this?

If you want to have AP on a different subnet from the WLC, then yes you would want to configure another server and option 43.

Does option 43 matter ? WLC5508 ver 7.2 using internal DHCP serv

http://www.cisco.com/image/gif/paws/97066/dhcp-option-43.pdf

It's in the introduction.

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Does option 43 matter ? WLC5508 ver 7.2 using internal DHCP serv

Option 43 to join specific Wireless LAN Controllers (WLCs) when the WLC is in a different subnet than the LAP.

Awesome! Thank you.

Hall of Fame Super Silver

Re: Does option 43 matter ? WLC5508 ver 7.2 using internal DHCP

You don't new option 43. The internal dhcp doesn't allow you to create any options, just default dhcp requirements.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
1683
Views
0
Helpful
7
Replies
CreatePlease login to create content