Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DOT11 radio 0 stuck in status reset protocol down

Hi guys

I am using a 1310 AP (bridge) with power injectors.

I have tried to power off the injectors, but the dot11radio interface is not showing up. Its showing status reset and protocol down,

Please help!Urgent

Regards,

Rachna

5 REPLIES
Hall of Fame Super Silver

Re: DOT11 radio 0 stuck in status reset protocol down

Is this a new install? If so, did you configure the SSID and authentication method for that radio?

http://www.cisco.com/en/US/docs/wireless/access_point/1300/quick/guide/br13qsg.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

DOT11 radio 0 stuck in status reset protocol down

Thanks for your reply Scott.

This was working before.

This is not a new install.

Regards,

Rachna

Hall of Fame Super Silver

Re: DOT11 radio 0 stuck in status reset protocol down

Do you see a hardware error when consoled in and power cycling the bridge?

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Gold

DOT11 radio 0 stuck in status reset protocol down

Power off the AP, console the AP, power on the AP.

Post the entire bootup process. 

New Member

DOT11 radio 0 stuck in status reset protocol down

I changed the role in the network to Root node on this brodge and the radio interfaces came up, but this device stopped talking to other network.

There is similar  1310 bridge set up in such a dierction so that it can talk to this bridge, but this is not pinging from the rest of the network.

One Small ESW-520-8P switch is connected to this 1310 bridge but the switch can be pinged from the bridge.

Does that mean it is faulty or antenna problem...

Regards,

Rachna

2923
Views
0
Helpful
5
Replies
CreatePlease login to create content