Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dot1x with AP 1142G

Hallo Community,

i have some problemes with the dot1x configuration an AP 1142G.

We use for the Radius Server Windows 2008 R2 NPS Server this server is in an AD Domain.

The Access Point use these Software version:

Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(21a)JY, RELEASE SOFTWARE (fc1)

We have 5 VLAN´s (SSID´s) on the AP. Every department use a own SSID in the company, but one SSID are for guests(only WPA2 authentification via PSK).

If a user from the sales is connecting to the AP, he must get the vlan 1200 over WPA2 Enterprise authentification. ( vlan via Radius rule ).

I need the CLI commands to configure the APwith mutiple SSID´s abd dot1x via NPS Server, i hope anybody can help me.

Regards

Thun

377
Views
0
Helpful
0
Replies
CreatePlease to create content