Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Downgradeing to 7.4 from 7.5

                   Hello, 5508 WLCs, I put 7.5 on tem ad went o 2.0 on prime, so now I wish to downgrade o 7.4 code. I tftp'd the files to the wlc, did the save and reboot but they are coming back at ver 7.5  is there something I need to do for this to use the 7.4 code?  thanks for any help.

2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Purple

Downgradeing to 7.4 from 7.5

wait for few minutes, AP download the new code and it take some time.

Regards

Hall of Fame Super Silver

Re: Downgradeing to 7.4 from 7.5

I always downgrade and upgrade all the time... especially when I test beta code.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
6 REPLIES
New Member

Downgradeing to 7.4 from 7.5

Oops, never mind    they finished and now say they are on 7.4.102.0 for the AP's

VIP Purple

Downgradeing to 7.4 from 7.5

wait for few minutes, AP download the new code and it take some time.

Regards

Cisco Employee

Downgradeing to 7.4 from 7.5

It is never suggested to downgrade the code.

Only option to save the code/config on controller through GUI is to hit save on controller GUI. It will take some time and will do it.

Hall of Fame Super Silver

Re: Downgradeing to 7.4 from 7.5

I always downgrade and upgrade all the time... especially when I test beta code.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
New Member

Downgradeing to 7.4 from 7.5

Well it worked just fne. At first it looks like it is downloading the 7.5 bt after it completes it says 7.4  so  I was hasty in my posting here.

Thanks, this forum is a great one for help fast.

Hall of Fame Super Silver

Re: Downgradeing to 7.4 from 7.5

So what I do is use the pre-image download feature....

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-3/configuration/guide/b_cg73/b_wlc-cg_chapter_01010.html#ID1225

Once all the AP's download the image, I swap the image on the AP.  Then I reboot the WLC.... once the AP's come back up, you will see that it will join and show the old image and no image for the backup.  The AP will disassociate and join again with the new image as the primary and the old image as the backup image.

Take a look at this post also:

https://supportforums.cisco.com/thread/2262041

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
94
Views
0
Helpful
6
Replies