We have a 1220 AP with the A-band modular card and the b-band mini-pci card. Can you assign each SSID a different name in the same unit? In the setup guide for a dual band AP, they are both called "tsunami" by default. I want each band to be recognised by a different name by my wireless clients. Is this possible?
The configuration for the 2 radios is completly separate so you can use either the same or different ssid's and any other radio settings if you use the same you most still configure both radios ie do it twice one on each radio page The best way to think of it as 2 AP's in one chassis
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...