Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Enabling 5Ghz

I just enabled 5Ghz 802.11a/n on my Cisco 5508 controller.

I see my client machine associted with 802.11a/n (it is my understanding that "a" is required for 5Ghz).

Is there a way I can confirm I am in the 5Ghz range? (we have 2.4Ghz enabled as well)

  • Getting Started with Wireless
1 REPLY

Enabling 5Ghz

whn you see the client connected as 802.11a you can confirm you are the in the 5 Ghz range. you can also check the channel that the client is connected to, 2.4 GHz have 1, 6 and 11, while anything above 36 will be of the 5GHz range

Thanks

NikhiL

361
Views
0
Helpful
1
Replies
This widget could not be displayed.