Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Error loading flash: (Boot process failed)

Does anyone know how to recovery from this 1130 AP. The flash is deleted. I tried to search the recovery steps but there is no document on this.

Thanks!

ap: dir

List of filesystems currently registered:

flash[0]: (read-write)

xmodem[1]: (read-only)

null[2]: (read-write)

tftp[5]: (read-only)

ap: help

? -- Present list of available commands

arp -- Show arp table or arp-resolve an address

boot -- Load and boot an executable image

cat -- Concatenate (type) file(s)

clear_ether -- clear ethernet port statistics

copy -- Copy a file

delete -- Delete file(s)

dir -- List files in directories

dump_save_regs -- dump saved regs in OCM

etest -- test emac driver code

ether_init -- initialize ethernet port

flash_init -- Initialize flash filesystem(s)

format -- Format a filesystem

fsck -- Check filesystem consistency

help -- Present list of available commands

init_pci -- initialize pci bridge

led_test -- cycle led patterns

memory -- Present memory heap utilization information

mkdir -- Create dir(s)

more -- Concatenate (display) file(s)

rename -- Rename a file

reset -- Reset the system

reset_gpio -- reset gpio

rmdir -- Delete empty dir(s)

set -- Set or display environment variables

set_baud -- set baud rates

set_gpio -- set gpio

set_sleep -- Pause (sleep) for a specified number of seconds

show_ether -- show ethernet port statistics

show_pci -- show pci setting

switch status -- report push button switch status

tar -- extract or listing a tar file

test ram -- read at address

tftp_init -- Initialize tftp file system

type -- Concatenate (type) file(s)

unset -- Unset one or more environment variables

version -- Display boot loader version

ap:

ap: boot

Loading "flash:/c1130-k9w7-mx.124-10b.JA/c1130-k9w7-mx.124-10b.JA"...flash:/c1130-k9w7-mx.124-10b.JA/c1130-k9w7-mx.124-10b.JA: magic number mismatch: bad

mzip file

Error loading "flash:/c1130-k9w7-mx.124-10b.JA/c1130-k9w7-mx.124-10b.JA"

Interrupt within 5 seconds to abort boot process.

Boot process failed...

ap: dir

3 REPLIES
Silver

Re: Error loading flash: (Boot process failed)

New Member

 ap: bootLoading ""...:

 

ap: boot
Loading ""...: permission denied

Error loading ""

Interrupt within 5 seconds to abort boot process.
Boot process failed...

VIP Purple

HI,Please check this to

HI,

Please check this to recover IOS:

https://supportforums.cisco.com/document/31571/cisco-aironet-access-points-ios-recovery

 

or Check this:

http://tech.jocke.no/2012/05/17/how-to-recover-ap-from-ios-failure/

 

Regards

Dont forget to rate helpful posts

6332
Views
0
Helpful
3
Replies