Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Error message

Hi all,

I got this message when i try to save the configuration on AP 1231:

Traing_Center#wr
Building configuration...

Error writing new config file "flash:/config.txt.new"
nv_done: unable to open "flash:/config.txt.new"
Error writing new block-fs file "flash:/private-multiple-fs.new"[OK]

Also, below is flash contents:

Traing_Center#sh flash

Directory of flash:/

    2  -rwx      274760  Mar 08 2002 17:04:35 +00:00  crashinfo_20020308-170302
    3  -rwx      274274  Mar 05 2002 15:41:18 +00:00  crashinfo_20020305-154111
    4  -rwx      121947  Mar 01 2002 13:53:56 +00:00  crashinfo_20020301-135039
    5  -rwx        3083  Mar 01 2002 23:14:52 +00:00  config.txt
    6  drwx         512  Aug 28 2008 21:45:56 +00:00  c1200-k9w7-mx.123-8.JEC
  158  -rwx           0  Mar 01 2002 00:08:00 +00:00  config.txt.new
  159  -rwx      299010  Mar 01 2002 22:36:18 +00:00  crashinfo_20020301-223611
  160  -rwx      283001  Mar 05 2002 23:45:31 +00:00  crashinfo_20020305-234524
  161  -rwx      262592  Mar 04 2002 23:14:48 +00:00  r0.rcore
  162  -rwx      304369  Mar 07 2002 02:37:53 +00:00  crashinfo_20020307-023743
  163  -rwx      308220  Mar 01 2002 21:56:49 +00:00  crashinfo_20020301-215633
  164  -rwx      288342  Mar 02 2002 00:02:32 +00:00  crashinfo_20020302-000108
  165  -rwx      312103  Mar 02 2002 06:00:37 +00:00  crashinfo_20020302-055901
  166  -rwx        1048  Mar 01 2002 23:14:55 +00:00  private-multiple-fs
  167  -rwx           5  Mar 01 2002 23:14:52 +00:00  private-config
  168  -rwx         236  Mar 01 2002 00:06:59 +00:00  env_vars
  169  -rwx           0  Mar 01 2002 00:08:10 +00:00  private-multiple-fs.new

7741440 bytes total (0 bytes free)

I don't want to save the configuration now, if you please, need help

3 REPLIES
Bronze

Re: Error message

Looks like your flash is full.  Delete some crashinfo files and try again.

-John

Hall of Fame Super Gold

Re: Error message

(0 bytes free)

Firstly, delete the "crashinfo" files using the command "delete flash:crashinfo*".  Next, you need to find out WHY it's crashing.   Latest IOS for the 1230 is the 12.3(8)JED1.

Community Member

Re: Error message

Thanks a lot, it is solved as i can save config. now.

I download the crashinfo files to read and understand why such crashes happen, but, i understood nothing...sothat i can avoid such crashes in the future.

So, i attached these files, if any one can intercept it.

344
Views
0
Helpful
3
Replies
CreatePlease to create content