Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Failed to add Cisco Aironet 3502 to Cisco WLC 5508

Hello I have a Cisco WLC5508 controller which I recently upgraded to software 7.0.98.0 because I tried to add a Aironet 3502 and it gave me an invalid software.  After the upgrade this is the error I get from the AP when I try to add.  Please help.

*Sep  7 16:21:35.056: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Sep  7 16:21:45.056: %CAPWAP-3-ERRORLOG: Go join a capwap controller

*Sep  7 16:21:45.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.39.22.10 peer_port: 5246

*Sep  7 16:21:45.000: %CAPWAP-5-CHANGED: CAPWAP changed state to

*Sep  7 16:21:45.443: %DTLS-5-ALERT: Received FATAL : Certificate unknown alert from 10.39.22.10

*Sep  7 16:21:45.443: %CAPWAP-3-ERRORLOG: Bad certificate alert received from peer.

*Sep  7 16:21:45.443: %DTLS-5-PEER_DISCONNECT: Peer 10.39.22.10 has closed connection.

*Sep  7 16:21:45.443: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.39.22.10:5246

*Sep  7 16:21:45.443: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.

6 REPLIES
Cisco Employee

Re: Failed to add Cisco Aironet 3502 to Cisco WLC 5508

Hi Michael,

Can you check date and time on the WLC 5508?

Thanks

Serge

New Member

Re: Failed to add Cisco Aironet 3502 to Cisco WLC 5508

Does the date/time prevent you from adding CAP?

New Member

Re: Failed to add Cisco Aironet 3502 to Cisco WLC 5508

Thanks Serge,

I will be starting to deploy my WCS WLC5508 and CAP3502 network tomorrow, so I am just collecting all necessary configuration guides.

kind regards,

Dan

New Member

Re: Failed to add Cisco Aironet 3502 to Cisco WLC 5508

Hi,

if your AP is with mesh image you must add them manually,follow the path below on the WLC.(through web interface)

security->AAA->AP Policies

-AP Authorization list

put the AP MAC and add them,save the config on WLC.restart AP after 5 min.

BR

Jana

New Member

That was the exact

That was the exact information I needed!! I didnt find it in the docs or I missed it. Thanks

5762
Views
5
Helpful
6
Replies
CreatePlease login to create content