Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

flash:wlanui not working on Cisco 857w

I have a 857w router and I am trying to configure wireless on it. From the SDM when I click on configure wireless a link pops into my browser to go to http://192.168.1.1/flash:wlanui/......

This says page cannot be displayed.

I believe I am missing this file from flash: but cannot find anywhere to download a new one or anything saying what I need to download.

Any help really appreciated.

Roger

1 REPLY
Silver

Re: flash:wlanui not working on Cisco 857w

Use the following command to verify that the sdm.tar file is in flash RAM:

Router# show flash:

The result of this command should include the sdm.tar file if the full version of Cisco SDM is loaded on the flash memory.

If sdm.tar is present in flash RAM, go to step 2.

If the result of this command shows the following files, Cisco SDM Express is in the flash memory, so skip step 2 and go to procedure 2 for the Cisco IOS Software upgrade.

home.shtml

sdmconfig-.cfg

home.tar

es.tar

common.tar

wlanui.tar (this file is available only if WLAN application is available on the router)

Go to below link to download the Cisco IOS software.

http://www.cisco.com/kobayashi/sw-center/sw-ios.shtml

Here is the URL for the Cisco Router and Security Device Manager Quick Start Guide

http://www.cisco.com/en/US/products/sw/secursw/ps5318/products_quick_start09186a0080511c89.html

321
Views
0
Helpful
1
Replies
CreatePlease to create content