Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Flex AP with strange EVT-5-NTC d0 Beacon events

Hello Support Community,

I am experiencing some strange behaviour with an AIR-LAP1142N-E-K9.

It is running with CAPWAP on a CT5508. Firmware; 7.4.110.0

It is one of many FLEX APs on that controller and I havent seen this behaviour on any other yet.

The user on site have a very slow connection process. It can take up to 45 minutes untill they actually connect.

The AP log shows alot of this:

(controller) >show ap eventlog ulmipap01

AP event log download has been initiated

Waiting for download to complete

AP event log download completed.

======================= AP Event log Contents =====================

Feb 17 12:16:26.176: %EVT-5-NTC:

d0 Beacons set state ds 2020105 0 1 0 0 0

Feb 17 12:16:26.211: %EVT-5-NTC:

d1 Beacons set state ds 2020105 0 1 0 0 0

Feb 17 12:16:26.212: %EVT-5-NTC:

d0 Beacons set state ds 2020105 0 1 0 0 0

Feb 17 12:16:26.301: %EVT-5-NTC:

d1 Beacons set state ds 2020105 0 1 0 0 0

Feb 17 12:16:26.301: %EVT-5-NTC:

d1 Beacons set state ds 2020105 0 1 0 0 0

Feb 17 12:16:26.394: %EVT-5-NTC:

d1 Beacons set state ds 2020105 0 1 0 0 0

Feb 17 12:16:26.394: %EVT-5-NTC:

d1 Beacons set state ds 2020105 0 1 0 0 0

Feb 17 12:16:26.510: %EVT-5-NTC:

d1 Beacons set state ds 2020105 0 1 0 0 0

I could not find any reasonable explainations of this message. Surprisingly google also hasn't seen this particular event message yet.

Before you ask: Link Latency is fine for the most part:


Current (mSec) Minimum (mSec) Maximum (mSec)
Link Latency6
24
214
Data Latency<1 <1
<1

And help is greatly appreciated.

8 REPLIES
Hall of Fame Super Silver

Re: Flex AP with strange EVT-5-NTC d0 Beacon events

Couple questions... Is this happening on all AP's at that site or just one? Are all users being affected or just one? Is it a specific device type that's having issues?

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Flex AP with strange EVT-5-NTC d0 Beacon events

Hello Scott,

device type AP: AIR-LAP1142N-E-K9

device type Clients: Notebooks

The location only has the one AP.

Further event entries:

Feb 17 14:30:03.596: %EVT-5-NTC_PROC: dot11_return_serving_channel: d1 Channel 36

Process: Dot11 driver

Feb 17 14:30:17.091: %EVT-5-NTC_PROC: dot11_return_serving_channel: d0 Channel 1

Process: Dot11 driver

The d0 and d1 in the aforementioned seem to refer to 2.4 and 5 GHz radio.

Hall of Fame Super Silver

Flex AP with strange EVT-5-NTC d0 Beacon events

Thats still not enough information to help.... what other log info are you seeing from the WLC?  Is iphones and android devices working fine?

Post the following:

show sysinfo

Thanks,


Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
Community Member

Flex AP with strange EVT-5-NTC d0 Beacon events

At the moment the user tell me the connectivity looks good.

But there are still those %EVT-5-NTC eventlogs on the AP every few milliseconds.

(controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.

Product Name..................................... Cisco Controller

Product Version.................................. 7.4.110.0

Bootloader Version............................... 1.0.16

Field Recovery Image Version..................... 7.0.112.21

Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2

Build Type....................................... DATA + WPS

System Name...................................... hdhi402a0ws01

System Location..................................

System Contact................................... **************

System ObjectID.................................. 1.3.6.1.4.1.9.1.1069

Redundancy Mode.................................. Disabled

IP Address....................................... ***.***.***.***

Last Reset....................................... Power on reset

System Up Time................................... 2 days 0 hrs 46 mins 35 secs

System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin, Rome, Vienna

System Stats Realtime Interval................... 5

System Stats Normal Interval..................... 180

Configured Country............................... DE  - Germany

Operating Environment............................ Commercial (0 to 40 C)

Internal Temp Alarm Limits....................... 0 to 65 C

Internal Temperature............................. +44 C

External Temperature............................. +24 C

Fan Status....................................... OK

State of 802.11b Network......................... Enabled

State of 802.11a Network......................... Enabled

Number of WLANs.................................. 6

Number of Active Clients......................... 1285

Memory Current Usage............................. Unknown

Memory Average Usage............................. Unknown

CPU Current Usage................................ Unknown

CPU Average Usage................................ Unknown

Burned-in MAC Address............................ 44:D3:CA:B7:5E:A0

Power Supply 1................................... Present, OK

Power Supply 2................................... Present, OK

Maximum number of APs supported.................. 250

When you say "other log info  from the wlc" do you mean something specific? I have about 1000 clients  on it. So there are quite alot of syslog messages going around.

Hall of Fame Super Silver

Flex AP with strange EVT-5-NTC d0 Beacon events

Just wanted to see if you see any general logs, but with that many clients it would be tough.  The AP is joined to the WLC and is serving clients or not?  Is the radios on the AP's enabled?

config 802.11a enable network

config 802.11b enable network

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
Community Member

Flex AP with strange EVT-5-NTC d0 Beacon events

... I'm going to open a TAC.

Community Member

Hello, did you solve this

Hello, did you solve this issue? how? thanks in advance.

Community Member

Hello Martin,sorry for the

Hello Martin,

sorry for the long wait.

No I didnt solve it. Which means AP logs are completely useless for me atm, as most (if not all) of my APs with 7.4.* spam those messages all day, every day.

If I remember correctly, the TAC response was something like "oh well, sorry about that."

I hope they fix it with a future 7.4 patch.

398
Views
0
Helpful
8
Replies
CreatePlease to create content