Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Flexconnect- branch specific SSIDs

Hi

In  a Flexconect deployment can we have unique SSIDs configured for the remote offices.The objective is to prevent remote office users from being asscoiated with the Central Site SSIDs(dont want central site SSIDs being propagated to the remote SSIDs).This is possible in Aruba.Is it supported in Cisco and how do we enable the same

Thanks

Sumesh

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Flexconnect- branch specific SSIDs

Yes this is possible by using AP Groups. AP Groups allow you to create unique groups that you place access points in. Then you also have the ability to configure what SSID's is part of that AP Group. Here is a link:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
2 REPLIES
Hall of Fame Super Silver

Re: Flexconnect- branch specific SSIDs

Yes this is possible by using AP Groups. AP Groups allow you to create unique groups that you place access points in. Then you also have the ability to configure what SSID's is part of that AP Group. Here is a link:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
VIP Purple

Re: Flexconnect- branch specific SSIDs

Agree with Scott, you can do that via AP group.

Here is a very good CiscoLive material which gives you all the features supported in FlexConnect design. This should provide you answer if you have more queries on this FlexConnect design/Features.

HTH

Rasika

**** Pls rate all useful responses ****

291
Views
3
Helpful
2
Replies
CreatePlease to create content