Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FlexConnect Groups - WLAN WLAN mapping tab

Migrated  (AIR-CT7510-K9 in HA ) from 7.5.102 to 7.4.121

Under new code I am now missing the " WLAN WLAN mapping " tab  when editing the FlexConnect Groups

Can someone confirm that this option is not available under the new FlexConnect groups?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver

FlexConnect Groups - WLAN WLAN mapping tab

That feature is not available on the v7.4 code train, only on v7.5 and newer.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

FlexConnect Groups - WLAN WLAN mapping tab

Here is a screen shot from a 5508 running v7.4.121.0, which is what you see also.

2-15-2014 10-33-10 PM.jpg

Here is from v7.6

2-15-2014 10-35-30 PM.jpg

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
3 REPLIES
Hall of Fame Super Silver

FlexConnect Groups - WLAN WLAN mapping tab

That feature is not available on the v7.4 code train, only on v7.5 and newer.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

FlexConnect Groups - WLAN WLAN mapping tab

Here is a screen shot from a 5508 running v7.4.121.0, which is what you see also.

2-15-2014 10-33-10 PM.jpg

Here is from v7.6

2-15-2014 10-35-30 PM.jpg

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: FlexConnect Groups - WLAN WLAN mapping tab

Just remember what code we mentioned in the other thread as stable:) this is a nice feature, but you also can script something on the WLC CLI to assign the WLAN to Vlan mappings to a FlexConnect AP. The biggest issue in the past was FlexConnect AP's loosing Vlan mappings and this was nice to have, but the later code versions seemed to fix this also. I'm running this code with large FlexConnect deployment but not using FlexConnect groups because they are not using 802.1x and it's been working great. If you really want this feature, then really take a look at the bugs on v7.6 before making a decision.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
197
Views
0
Helpful
3
Replies
CreatePlease login to create content