FlexConnect Groups - WLAN WLAN mapping tab

[jpiehl]

Migrated  (AIR-CT7510-K9 in HA ) from 7.5.102 to 7.4.121

Under new code I am now missing the " WLAN WLAN mapping " tab  when editing the FlexConnect Groups

Can someone confirm that this option is not available under the new FlexConnect groups?

[Scott Fella · Accepted solution]

That feature is not available on the v7.4 code train, only on v7.5 and newer.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

[Scott Fella · Accepted solution]

Here is a screen shot from a 5508 running v7.4.121.0, which is what you see also.

Here is from v7.6

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

[Scott Fella]

Just remember what code we mentioned in the other thread as stable:) this is a nice feature, but you also can script something on the WLC CLI to assign the WLAN to Vlan mappings to a FlexConnect AP. The biggest issue in the past was FlexConnect AP's loosing Vlan mappings and this was nice to have, but the later code versions seemed to fix this also. I'm running this code with large FlexConnect deployment but not using FlexConnect groups because they are not using 802.1x and it's been working great. If you really want this feature, then really take a look at the bugs on v7.6 before making a decision.

Sent from Cisco Technical Support iPhone App