Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Generate Certificates for WLC and clients

Hi Guys

 

I've been working acording the following document to integrate my WLC 5508 with LDAP for internal users:

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/100590-ldap-eapfast-config.html

 

However when I try to generate the device certificate on Windows Server 2012, I see the steps are different, for example when I reach the step 4 (of Generate a Device Certificate for the WLC section), the CA ask me for a Certificate Signing Request instead of Create and submit request to this CA option, as appears in the document.

How do I get this? 

 

Thanks in advance for your support!

Marcelo

 

 

Everyone's tags (2)
1 REPLY
VIP Purple

Hi,If you are trying to get a

Hi,

If you are trying to get a device certificate for WLC, then you may need to use 3rd party software like openSSL for this.

Below post may help you to see how you can do this

http://mrncciew.com/2013/04/22/configuring-eap-tls-on-wlc/

 

HTH

Rasika

*** Pls rate all useful responses ****

69
Views
0
Helpful
1
Replies
CreatePlease to create content