For clarity i give you an example of computer's mother board. As all computers have mother boards but all have different make models, my computer have intel DZ68ZV mother board like wise another person have intel DX79T0.
In the same way i want to know that in 5508 what is the model of installed SFP card.
I’m still a little confused, sorry. Are you looking for the model of the installed SFP transceiver module or the part number of the SFP port bank itself?
Are you looking for this:
If you want to know the transceiver module, you can look at the show port summary command. It will tell you what type of transceiver you have in there, although it won't list the exact make/model but you can figure it out. 1000BaseTX = GLC-T. 1000BaseSX = GLC-SX-MM. 1000BaseLX = GLC-LH-SM.
If you want to know the part number for the SFP bus, ports or chips themselves, then I'm at a loss for you. I guess you can take the controller apart and do a visual inspection to see if you find anything useful. Are you trying to DIY repair a dead controller or something?
I am not trying to repair a dead contoller or someting like that. I just want to know the make model but i think i might not be able to convence you peple about that. The model number is not not important in network deployment rather it is deployed and working properly. It is for some other purpose
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...