When I attempt to connect to the SSID I now see the web_auth page with the email box. I enter the email and click on accept and it's not sending me to the "successful connection" html page. I think it has to do with the fact that it came from the older controller, so it's looking for files that reside there, instead of the ones in the newer controller. I know what to replace it with but I don't know where to paste it, it's all gibberish to me. Here's the html code for the page:
This service is intended for use by authorized guests at this facility. This is an open/unprotected wireless network. By using this service, guests understand and accept that it is their responsibility to protect their own computer while connected to this service, and irrevocably waive any right, cause or action, remedy or other claim against the host with respect to any damage that may be caused to a computer while it is using this network.
Well, first I thought I could download the one we're currently using from the 5508 and re-upload to the 5760, but there seems to be something wrong with the HTML config looking for files in the 5508 that are not existent in the 5760. I involved our apps team and they sent a possible solution I will be trying out shortly. The 5760 came with nothing native, I had to download a separate bundle and upload it; but those pages look too simple, although they can be modified. I'll be posting my results in the thread soon.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...