Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Guest VLAN setup on WLC526

I'm trying to setup a WLC526 with two WLANs, one for the internal corporate network and one for guest access. I have the internal corporate network WLAN configured and working fine. All users get IP addresses from the DHCP server and can access network resources.

The guest network has me confused. I can create the WLAN and SSIDs. Machines can connect to the WLAN, but there is no DHCP and no internet access.

I'm guessing I've got a problem with the guest subnet not routing correctly. I'm fairly new to the routing part of networking, so I'm at a loss as to where to go next. Am I looking at setting up VLANs on the switches (3 Com layer 2 switches) or a Super Scope on the DHCP server for having multiple subnets on the same physical segment? If it helps the router on this network is a Cisco 2821.

1 REPLY
New Member

Re: Guest VLAN setup on WLC526

I have a similar problem. Do you have a solution?

178
Views
0
Helpful
1
Replies