H-REAP Confiugration - 2 sites, with 2 different ssids
I have a WLC4402 running software release 4.2.207 to which around 40 AP1020 AP's are registered, the wlan is configured with one WLAN/SSID.
Now I have another remote site running Cisco AP1252 AP's, each AP is in autonomous mode at the moment and is running one SSID. Now I want to convert each of these AP's to LAP's.
In my lab I have managed to convert the AP1252 to Lightweight AP's - thats OK.
With the remote site AP's configured as H-REAP access points I would like to know whether I can have two SSIDS on my WLC one for the H-REAP's and one for my local WLAN?
I basically have quite a lot of wlan clients and changing the WLAN Profile is not really a practical option so I want to preserve WLAN configurations on all the clients.
I would like to know whether it is possible to have the local ssid only visible/distributed on the local AP's and another ssid only visible/distributed on the remote ap's - which will be in h-reap mode?, or another way of putting it, is it possible to have a SSID linked to specific AP's or AP groups.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...