Re: H-REAP : difficulty to get IP-adress for client after loss o
You are maybe right.
I do 4 actions/
- Change in Wlan :
1 Aironet IE : From enable to disable (There is information in the packet that some older clients do not understand and clients can act in strange ways. So when we disable this feature, we find the client act much better
2 Client exclusion : from enable to disable (This feature comes into play if a client has issues connecting to the wlan 3 successive times. He then will be knocked off the wlan and has to wait 60 seconds to join)
3 WMM policy : from disable to allowed (If you have any WMM clients on the wlan they will be able to work/connect
4 Upgrade my driver: (This is always a good thing to do. The newer the driver the more fixes for previous issue on the older version driver
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...