Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

HA SSO doesnt sync certificates between primary and standby

Hi,

Since the HA SSO doesn't sync device certificates, how do I get the certs used to authenticate devices (laptops) onto the standby controller?

Thanks.

 


 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

You need to disable AP SSO

You need to disable AP SSO and once broken apart, you install the certificate on the HA (secondary).  Once you install the cert and reboot the WLC, then you can enable AP SSO. 

This is the only way. 

-Scott
*** Please rate helpful posts ***
1 REPLY
Hall of Fame Super Silver

You need to disable AP SSO

You need to disable AP SSO and once broken apart, you install the certificate on the HA (secondary).  Once you install the cert and reboot the WLC, then you can enable AP SSO. 

This is the only way. 

-Scott
*** Please rate helpful posts ***
133
Views
5
Helpful
1
Replies
CreatePlease login to create content