Hi, I got a problem with a ap that I have here where I do not have the password and I did the process to reset the AP to factory defaults, but the configuration still the same, and the AP still asking for the enable password, its the same problem poused before in this link https://supportforums.cisco.com/thread/2030572 I did the same process but I still have the old configuration on the AP. I noticed that the AP change the image when I reset the AP, using the mode button. the AP is starting with and rcv image: flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx. Can someone give me and hand with this? I need to reset the AP to its initial configuration. Like new, but the regular process con the cisco website does not work, this is the show flash command:
Directory of flash:/
2 -rwx 525184 Jan 27 2009 18:01:20 +00:00 r0.rcore
3 -rwx 6168 Mar 01 2002 00:00:32 +00:00 private-multiple-fs
4 drwx 128 Jan 01 1970 00:01:58 +00:00 c1130-rcvk9w8-mx
14 drwx 320 Dec 05 2010 08:49:59 +00:00 c1130-k9w8-mx.124-21a.JA2
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...