We´re experiencing a trouble with our Wireles LAN solution. We have a WLC 5504, a ACS 4.2 and APs 1131AG.
After deploying the solution and doing some tests we noticed when a user attempted to connect by wireless network there was too much delay since they clicked ie (internet explorer) until web authentication into WLC was shown. the delay was around 3 minutes. This issue also ocurrs despite of doing a test from my laptop that was next to one access point, then, I moved to another access point and the result was the same, a laptop problem is ruled out.
Has anybody ever had this kind of trouble? , How could I reduce this time?, is it possible?, Which part of configuration shoud I check?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...