Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Hello,good day problem with Cisco aironet 1040 series acces point

Hello good day to all, how to configure cisco aironet 1040 series using web configuration attaching through patch cord without using the console.

if possible please send me step by step instruction, any help is gladly appreciated.

thank you in advance, More power

mel

8 REPLIES
Hall of Fame Super Gold

Hello,good day problem with Cisco aironet 1040 series acces poin

Depends on what IOS your WAP is running.  If your WAP is running CAPWAP IOS then you need to convert it to autonomous.

The WAP, by default, does NOT have an IP address so you need to connect the WAP to get an IP address.

New Member

Hello,good day problem with Cisco aironet 1040 series acces poin

helo good day sir,

this is the first time i configure this device i am using Cisco aironet 1040 for our wireless using POE for power, and using cisco catalyst 2960 as switch

i jack the patch cord in and its goes on colored green,

the thing is how i can configure the aironet 1040  sir?

waiting for a step by step instruction,

thank you in advance

mel

Hall of Fame Super Gold

Hello,good day problem with Cisco aironet 1040 series acces poin

the thing is how i can configure the aironet 1040  sir?

Depends on what IOS your WAP is running. If your WAP is running CAPWAP IOS then you need to convert it to autonomous.

Hall of Fame Super Silver

Re: Hello,good day problem with Cisco aironet 1040 series acces

Well I believe Leo wants to know what is the model number of the AP you have? You should be able to see that on the underside of the AP.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Hello,good day problem with Cisco aironet 1040 series acces poin

and for model sir is AIR-AP1041-A-K9

MAC:28940F05AE2C

New Member

Re: Hello,good day problem with Cisco aironet 1040 series acces

Depends on what IOS your WAP is running.

If your WAP is running CAPWAP IOS then you need to convert it to autonomous.

sorry sir i am new to this Cisco system,hope you can help me i thank you in advance

and for model sir is AIR-AP1041-A-K9

MAC:28940F05AE2C

mel

Hall of Fame Super Gold

Hello,good day problem with Cisco aironet 1040 series acces poin

New Member

Hello,good day problem with Cisco aironet 1040 series acces poin

hello good day thank you for the manual sir, but it is not possible configuring this AP in web browser beacuse i have no

DB-9 to RJ-45 serial cable,

can i use ordinary rj45 patch cord?

thanks,

mel

2355
Views
0
Helpful
8
Replies
CreatePlease to create content