are we able t oaccess the AP using console access?? if yes, try assigning the ip address to the BVI interface..
int bvi 1
try accessing the AP using browser and see if we could access the GUI..
If the radio interfaces doesnt come up then.. we are hitting the below bug..
the AP is hitting the software bug.. to resolve the issue we need to..
1- to upgrade to version 12.3(8)JEA
2- or to downgrade to version 12.3(7)JA2
>> Get the console access to the AP and then connect the ethernet cable between the AP and the laptop.
>> Both the AP and the laptop should be in the same subnet..
>> Donwload the latest image from cisco.com and point the image in the TFTPd32 server
>> in the console access, issue the command.
archive download-sw /force-reload /overwrite tftp://
AP# archive download-sw /overwrite /force-reload tftp://10.X.X.X/c1200-k9w7-tar.123-7.JA1.tar
if the above is not clear.. then i request you to open up a TAC case..
i can access console port but when AP 1200 run and stop at there. AP cant run ,i do not doing, I cant config it. I dont know how to upgrade ?? plz help me !