Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Help me on this case

I'm new in wireless, and my boss force me create an wireless solution for a big meeting hall.

It's is a big meetting hall with 40m long, 20m width, the requirement is 50-60 laplop can access to data center through wireless.

I'm thinking of two 350, is it OK ? Do I need an 12000 ?

Please hepl me on this

Thank you in advance.

2 REPLIES
Cisco Employee

Re: Help me on this case

Hi ,

If you want to go for 802.11b based wireless than 2 AP are enough but for

better throughput per user go for THREE AP 350 .

Ap350 is only for 802.11b standard ( 11meg - shared )

Ap1200 can do 802.11a ( 54 meg shared ) and 802.11b

In 802.11a standard there are 3 non overlapping channels like 1 , 6 and 11 .

So you can put all 3 AP in same are . This way you can get 11X3 =33 meg and

you can do load balance across 3 AP .

Rule of thumb is 25 users per AP .

Nilesh

New Member

Re: Help me on this case

Hi Nilesh,

Thank you very much for your response. It will help me a lot.

BTW, could you recommend some helpful online material for Cisco wireless solution and technical aspect.

Thank you in advance.

Hoang Duc Phuong

211
Views
0
Helpful
2
Replies
CreatePlease to create content