I'm trying to setup a 1131 to give wireless access to office workers if they need it, I just need it to be an extension of the wired LAN, as it is connected to the LAN I need this AP to be as secure as possible, we don't have a TACACs server or anything like that so was just going to use the AP's security WPA or similar.
Could someone let me know the best way to do this please (I'm not a networking expert but understand the basics )
Also if the AP is hooked up to the LAN will wireless clients pick up a DHCP address from the DHCP server on the LAN or do I need to configure DHCP on the AP somehow?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...