Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How can I debug Aggressive Load Balancing on the WLC ?

Hello Cisco-Experts,

I'm looking for the command on the Cisco WLC to debug Aggressive Load-Balancing.

There is a nice document, ID 107457 describing this feature, but it lacks the command.

Please investigate and help me and maybe improve YOur documentations.

Thanks in advance

Winfried

3 REPLIES
Cisco Employee

Re: How can I debug Aggressive Load Balancing on the WLC ?

Have you tried "debug dot11 load-balancing enable".

New Member

Re: How can I debug Aggressive Load Balancing on the WLC ?

Thank You very much for this tip

New Member

Re: How can I debug Aggressive Load Balancing on the WLC ?

Hello NetPros,

I have disabled now "Agressive Load Balancing" now on the WLC. To my surprise, still Load-balancing packets are received from our HREAP-APs via a WAN-Link on the central WLC.

Here is an example:

Tue Jan 13 15:35:59 2009: 00:1c:bf:4a:3f:2e LBS data stored for Mobile 00:1c:bf:4a:3f:2e from AP 00:23:5d:0e:e9:e0(0) new saved RS

SI (A -128, B -53), SNR 41, inUse 1, [rcvd RSSI (A -128, B -54), SNR 40]

Tue Jan 13 15:35:59 2009: 00:1c:bf:4a:3f:2e LBS data rcvd for Mobile 00:1c:bf:4a:3f:2e from AP 00:23:5d:0e:e9:e0(0) with RSSI (A -

128, B -55), SNR 42

Tue Jan 13 15:35:59 2009: 00:1c:bf:4a:3f:2e LBS data stored for Mobile 00:1c:bf:4a:3f:2e from AP 00:23:5d:0e:e9:e0(0) new saved RS

SI (A -128, B -54), SNR 41, inUse 1, [rcvd RSSI (A -128, B -55), SNR 42]

It is remarkable that the MAC-addresses of many of the WLAN-clients do not belong to our company and packets are send via a WAN-link.

Why do I see these packets while load-balancing is disabled ?

How is this working ?

Thank You for any explanation.

Winfried

548
Views
5
Helpful
3
Replies
CreatePlease to create content