Please pardon my ignorance, but I'm interested in how I can get one router to acces another router wirelessly. In other words, I have RJ-45 connections on one end of a building, and RJ-45 connections on the other end, but I don't want to run/ can't run cable from one end to the other end. I don;t need that fast of speed, like 1 Gbps, I think I can get by with 300 Mbps. I'm just curious what equipment I need. I currently have one Linksys E3000 handling my wireless networking. Can anyone suggest anything?
I think that's more of what I'm looking at, going with a bridge. Now, how does it work exactly? Do I get a bridge for each end of the building and then just plug each one into a router that's at that end of the building? And 54 Mbps would be fine too. I was just thinking the bridge might be 802.11n capable. So, I'm looking at going with two CIsco 1410 or 1310 to use at either end of the building, right?
>> how does it work exactly? Do I get a bridge for each end of the building and then just plug each one into a router that's at that end of the building?
ANS - You need to configure the bridges for SSID and then the bridges will get associated.. (one will be ROOT and other will be NON-ROOT). when associated, they will start to pass traffic between the buildings wirelessly. below link will give you deeper info..
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...