Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How do you configure WPA on a 1220b access point?

How do you configure WPA security on a 1220b access point running IOS software? Does anyone have a sample configuration to go by?

1 REPLY
New Member

Re: How do you configure WPA on a 1220b access point?

I've found that one of my wpa clients requires the wpa ssid to be set for guest mode or it doesn't work...this is what I use (I think I grabbed all the relevant parts out of the config)....

---cut here----

aaa new-model

aaa authentication login eap_methods radius

radius-server key 7 {hex key}

radius-server host {ip address}

radius-server attribute 32 include-in-access-req format %h

!

interface Dot11Radio0

encryption key 2 size 128bit 7 {hex} transmit-key

encryption mode ciphers tkip wep128

ssid wpa

authentication open eap eap_methods

authentication network-eap eap_methods

authentication key-management wpa

guest-mode

---end---

455
Views
0
Helpful
1
Replies
CreatePlease login to create content