How to access web GUI for cisco AP c2602e during the new setup?

[tonylimth]

Fyi,  The Cisco IOS C2600 software is AP3G2-RCVK9W8-M, version 15.2(2)JB

Boot loader <AP3G2-Boot-M> loaderversion 12.4(25e) JA1

[Scott Fella · Accepted solution]

There is no web GUI. That ap is a lightweight access point and requires a WLC. If you want a standalone access point then you need to convert that to autonomous. You need to also be able to download the autonomous software which requires a support contract.

Here are various way to convert these AP's.


http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPhone App

[tonylimth]

Hi Scott,

Thanks... So, even I have converted to autonomous, there is no way for me to access via GUI, am i right?

[Scott Fella · Accepted solution]

Only autonomous AP's will there be a GUI. So you need to convert your lightweight access point to autonomous then you can use the GUI.

Sent from Cisco Technical Support iPhone App

[Amjad Abdullah]

As Scott mentioned, only autonomous APs have GUI.

Make sure that HTTP/HTTPS server is enabled on the AP and try to oepn the GUI with the BVI IP address of the AP from the browser.

Rating useful replies is more useful than saying "Thank you"