Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

How to configuration Cisco Aironet 1602i as dhcp server?

Hi everyone.

Someone have the configuration procedure to configure the Cisco Aironet 1602I as dhcp server?

Thank you

4 REPLIES
Cisco Employee

Note When you configure the

Note When you configure the access point as a DHCP server, it assigns IP addresses to devices on its subnet. The devices communicate with other devices on the subnet but not beyond it. If data needs to be passed beyond the subnet, you must assign a default router. The IP address of the default router should be on the same subnet as the access point configured as the DHCP server.

https://supportforums.cisco.com/document/18871/dhcp-server-configuration-cisco-aironet-1100-and-1200-series-ap

the configuration is same on 1602 AP.

VIP Purple

Check this post from Steve:

Check this post from George:

 

http://www.my80211.com/cisco-auton-cli-commands/2010/3/8/autonomous-configure-a-cisco-ap-to-provide-dhcp-services.html

 

Regards

 

That's George's site Sandeep.

That's George's site Sandeep.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
VIP Purple

Yes steve thanks for

Yes steve thanks for correction.

1457
Views
0
Helpful
4
Replies
CreatePlease to create content